RAVEN
General system description
- ConnectsRAX, PLC, SCADA, DCS, sensors and third-party equipment
- Managed withCONFIQ — discovery, verification, provisioning
- Runs onRGX, at the plant
- Delivers toPOLYCRON and other authorized destinations
- Through an outageBuffered locally · resumed from the last confirmed delivery
Every machine. Every system. Connected.
RAVEN is the infrastructure OSWAR teck is building to move data between industrial equipment, edge computers, and authorized systems across plants. CONFIQ manages connected devices. RGX runs RAVEN at the edge. POLYCRON connects each measurement to the machine, component, and operating conditions that give it meaning.
Connect· Exchange· Synchronize· Contextualize· Manage· Integrate
Connect once. Use the data across systems.
A kiln drive’s bearing temperature may already be visible in SCADA. Its vibration waveform may come from a separate acquisition device. A reliability engineer needs both signals tied to the same bearing and time interval.
- Bearing temperatureSCADA
- Vibration waveformAcquisition device · RAX
- Tied toSame bearing · same time interval
With CONFIQ, engineers discover supported devices, verify channels and units, and configure acquisition on RGX. RAVEN is designed to carry the approved streams to their destinations. Additional applications can then use those readings without commissioning another connection to the machine.
Keep the original measurement time.
- RecordKiln drive · vibration
- Measured02:14:07
- Arrived02:40:12
- Timestamp kept02:14:07
At 02:14, an RGX node at the kiln loses its link to the plant server. The sensors keep measuring.
RGX is designed to buffer incoming readings locally while storage is available. When the link returns, RAVEN resumes transmission from the last confirmed delivery. A reading captured at 02:14 keeps that timestamp even if it arrives at 02:40. Engineers can inspect the backlog and verify which records reached their destination.
Connect · Exchange · Synchronize · Contextualize · Manage · Integrate
Inside RAVEN. The architecture.
- Connect
Industrial interfaces
RAX, PLC, SCADA, DCS, sensors and third-party equipment, through supported adapters.
- Device & fleet management
CONFIQ
Discover, verify, provision, configure and monitor supported devices and RGX nodes.
Explore CONFIQ - Edge computing
RGX
Runs RAVEN services at the plant, acquires measurements, processes signals locally and buffers records during outages.
Explore RGX - Data exchange
RAVEN
Delivers selected streams to authorized destinations, tracks acknowledgements and resumes interrupted transfers.
- Industrial data & context
POLYCRON
Ingests measurements, associates them with assets and operating conditions, and exposes contextualized data to applications.
Explore POLYCRON - Integrate
APIs & integrations
Connect approved external systems and make delivery status available to engineers.
From the kiln drive to the maintenance team
When vibration rises on a kiln drive, the first question is: what load was the drive under when the vibration changed?
Both streams, with source identity and measurement time intact.
Ultron reads exclusively from POLYCRON, giving the maintenance team the vibration and load history it needs to investigate the change.
Prove the connection on one machine.
Trace a reading from the equipment through RGX to POLYCRON. Interrupt the uplink, restore it, and verify that the buffered readings arrive with their original timestamps. Then open Ultron and inspect the recovered interval against the machine’s operating history.